HDMI Ver. 1.3a Compatible: VS3002's HDMI switching circuit fully transmits the signal of a present HDMI standard like the High Bit Rate audio signal as Dolby TURE HD, Dolby Digital Plus and dts-HD Master Audio and latest technology video signal as Deep Color / x.v.Color. 

6 Inputs / 2 Outputs:Two HDMI outputs are equipped for assuming to use with multiple display installation. (* Both outputs are not active simultaneously.)

High reliability TMDS pass-through switching: VS3002 adopted the pass-through type switching based on the data transfer method in accordance with TMDS that secures high reliability.

2.25GHz Video bandwidth for Deep Color: To transmit the Deep Color video signal in 36 bits (12 bit x3), the bandwidth of 2.25GHz was covered.

Built-in Emphasis function re-shape the dulled signal: The signal equalizer is installed to correct the signal that becomes duller by the characteristic of the source product and the cable length. The equalizer function re-shapes the signal and output a high-quality HDMI signal to AVR and the display product.(* The effect depends on the conditions with signal quality, cable characteristics, cable length, etc. * Choosing by the result of this function on and off is preferred.)

Automatic Input Switching mode: The input port is switched automatically by sensing the power of the connected source product is turning on. This function reduces the operation on the VS3002 and makes system control simpler.

Discrete input select command by remote and front panel:Ordinal product uses up and down commands for switching the input but the VS3002 prepare the discrete input and output switching commands on the remote and front panel.These discrete commands make the input select operation quickly especially for the product which has many input and output ports. As you already known well, discrete commands are important feature for CI remote programming.

RS-232C control: The VS3002 consider the compatibility with higher range control system (Crestron, AMX, RC9001…) and adopt bi-directional RS-232C control function.The state in the control terminal can be confirmed by feedback from VS3002 to say nothing of the achievement of a high operation of reliability.Bi directional RS-232C control makes the product status available and the system operation flexible and reliable.

Auto IR command generate function for marantz AVR and VP: The VS3002 equips auto IR command generator. By using this function, the VS3002 can be used virtually as a part of AVR (or VP). VS3002 generates “HDMI-1” function select commands for our AVR when VS3002 gets its input switching command. This function reduces the input switching operation for AVR (or VP) from the system control.

 

FEATURES MULTI CHANNEL/SURROUND Number of Channels THX DTS (ES, Discrete 6.1/ Matrix 6,1, Neo-6) Dolby Digital EX Dolby Pro Logic IIx Circle Surround II SOUND ENHANCEMENTS HDCD Decoder Current Feedback Topology Discrete Amplification Power Transformer D/A Conversion Digital Signal Processing Video Off Source Direct Chassis Variable X-over Display Off Video Up-conversion M.R.A.C (Marantz Room Acoustic Calibration) XM-Ready Dual AM/FM tuner Bass management Lip-sync (digital audio delay) Software Upgradable (RS232) IN/OUTPUTS VIDEO HDMI In Component In S-Video In Composite In HDMI Out Component Out S-Video Out Composite Out AUDIO Analog L&R In Analog L&R Out Digital Optical In Digital Coaxial In Digital Optical Out Digital Coaxial Out IEEE1394 connection OTHER Pre-Amplifier Out Main Amplifier In Multi-Channel In Multi-Room Audio Out Multi-Room Video Out Multi-Room Speaker Out Speaker A/B DAvED Transmitter External control (RS232C) DC Triggers D-Bus Remote (RC-5) In/Out External IR In/Out Front Panel A/V Inputs Headphone Out AC Outlets (Switched/Unswitched) SPECIFICATIONS AUDIO SECTION Power Output (8 Ohm) S/N Ratio Freq. Response (Analog In) Freq. Response (Dig In) TUNER SECTION FM Frequency Range S/N Ratio (Mono/Stereo) TUNER SECTION AM Frequency Range S/N Ratio VIDEO SECTION Video Freq. Response (Component) Video Freq. Response (Composit, S-Video) Signal to Noise GENERAL Color Front Panel Remote Control Power Requirement Power Consumption Dimensions W" x H" x D" (Inches) Weight (lbs)

Friend's Name:	Friend's E-mail Address:
Your Name:	Your E-mail Address:
Personal Message:
I found this item on the Marantz website and thought you might find it of interest. This groundbreaking product was designed to make everyone’s life a lot less complicated. As HDMI outputs become more common amongst source products, the need for an extremely versatile and reliable HDMI switcher is evident. <UL> <LI>6 HDMI inputs and 2 HDMI outputs </LI> <LI>Direct IR and RS-232C input </LI> <LI>Discrete Code Set for virtually every command </LI> <LI>Remote Controller Included </LI> <LI>Exclusive Sync Mode via Marantz Remote Control Bus(RC-5) for use w/Marantz AV Receivers/DLP Projectors <BR></LI></UL>
Note: The contact information provided above will not be collected or used for any other purpose.

Manuals and Documents:

• VS3002 User Manual - English (1.60MB) (3/7/2008)

Downloads:

• VS3002 RS-232C Control Codes
  

  Version:
  Date Posted:		3/7/2008
  Size:		169KB
  File Type:		PDF
  Download:		VS3002 RS-232C Control Codes
  Notes:		N/A

  ---

• VS3002 RC IR Codes
  

  Version:
  Date Posted:		3/7/2008
  Size:		7KB
  File Type:		ZIP
  Download:		VS3002 RC IR Codes
  Notes:		Excel format file

  ---